Dampak Laju Aliran Massa Pasir Pada Laju Erosi Pipa Di Pengolahan Gas Bumi Berbasis Interpolasi Newton

EasyChair Preprint 9437

Abstract

In the separation process for natural gas processing at SKK Migas, there is a sand content that must be separated so that it does not cause erosion in the pipe. To find out the impact of the mass flow rate of sand on the erosion rate in the pipe, it is necessary to do research. In this study, two methods were used, that is measurement and calculation. Det Norske Veritas (DNV) Recommended Practice 0501 was used by using two sample pipe, Blinded tee 3”×2”, and Reducer 3”×2”. Based on the measurement results, the Reducer pipe 3”×2” has better linearity than the Blinded tee 3”×2”. However, the calculation method used Newton's Interpolation. This method can be used to predict the rate of erosion of pipes in very large numbers even with little data. When compared between the measurement results and the calculation results, the Blinded Tee Pipe 3”×2” has an error of 0.368% and the Reducer Pipe 3”×2” has no error at all.

Keyphrases: Erosion rate, Newton's Interpolation, Sand mass rate, blinded tee 3”×2, reducer 3”×2

@booklet{EasyChair:9437,
  author    = {Aslam Chitami Priawan Siregar and Ni'Matut Tamimah and Enny Indasyah and Siti Maghfirotul Ulyah and Anifatul Faricha},
  title     = {The Impact of Sand Mass Flow Rate on Pipe Erosion Rates in Natural Gas Processing Based on Newton Interpolation},
  howpublished = {EasyChair Preprint 9437},
  year      = {EasyChair, 2022}}